圆柱帽

乙烯基塑料 对于管子 高温

Hi-Temp Long Caps非常适合掩盖长螺栓，管或难以到达的区域，长度长达24英寸的长度，长度为24英寸。风格：圆形末端或扁平端顶。ID：长帽通常应为sized to match the O.D. (outside diameter) of your part. Examples: If your O.D. is .625" (15.88 mm), use a .625" (15.88 mm) Long Cap. Length: All Long Caps are available in any length up to the maximum shown, within .062" (1.57 mm) increments. On Round End caps, the inside length tolerance of ± .062" (1.57 mm) is measured to the center of the closed end. On Flat End caps, the inside length tolerance of ± .062" (1.57 mm) is measured along the side wall to the radius of the closed end, not down the center. Wall thickness: Wall Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm). Materials: Hi-Temp Vinyl Hi-Temp Long Caps have been u