螺纹盖

轮 乙烯基 保护

长帽由坚韧，灵活的乙烯基，长帽长度可达24英寸长。理想的保护长螺栓或提供一个清洁的尾管。使用我们的双浸工艺，以实现双色或双硬度计零件。可根据您的要求进行压印、打孔或切片。产品有多种颜色、硬度和表面处理必威体育app官方下载。许多尺寸可提供“重型”壁厚的最大保护。用途:螺纹保护器管端保护器电缆端密封口罩(用于喷漆，电镀，粉末喷涂，抛丸)绝缘子类型:可提供圆头或平头顶部。ID:长帽的尺寸应该与你的零件的外径相匹配。例如:如果外径为。625" (15.88 mm)，使用。625" (15.88 mm)长瓶盖。为了更紧密的配合，选择较小的直径。通过使用肥皂水或加热零件使其更柔韧，更小直径的盖子可以更容易地使用。 Length: All Long Caps are available in any length up to the maximum shown, within .062" (1.57 mm) increments. On Round End caps, the inside length tolerance of ± .062" (1.57 mm) is measured to the center of the closed end. On Flat End caps, the inside length tolerance of ± .062" (1.57 mm) is measured along the side wall to the radius of the closed end, not down the center. Wall thickness: Wall Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm).