Magnetic float level sensorLINEAR

magnetostrictive for liquids RS-485

LINEAR – LCM – O – Magnetostrictive technology – Brass material – 1 analog output, current or voltage. – 2 analog outputs, current and voltage. – 2 factory programmable PNP digital outputs. – RS485 serial output, Valco protocol. – Programming via dedicated handheld computer VSP.130, on request – Up to 2, 9 m length. – Working pressure up to 50 bars depending on the used float. – Operating ambient temperature -30 / +70 °C, RH 90%. – Standard working temperature up to 105 °C 150 °C working temperature on request. – Minimum degree of protection IP67 Magnetostrictive continuous level transmitters base their operation on the physical principle called Wiedemann effect and it allows continuous and précisé measurement of liquid levels. The electronic unit sends a puise within a waveguide contained in the measuring rod; the magnetic float intercepts the puise generating an écho that is detected by the same electronic unit. The elapsing time between the émission of the puise and its récognition is directly proportional to the position of the float, and then to the value of the level to be measured. • - Brass - Spansil • - 1 analog output, current or voltage. • - 2 analog outputs, current and voltage. • - 2 factory programmable PNP digital outputs. • - RS485 serial output, Valco protocol. • - Programming via dedicated handheld computer VSP.130, on request • - Up to 2, 9 m length. • - Working pressure up to 20 bar • - Operating ambient température -30 / +70 °C, RH 90%. • - Standard working température up to 105 °C 120 °C working température on request. • - Minimum degree of protection IP67.