点焊机DTN系列

投影 AC. 气动

焊工点的指定方法（投影）焊机系列：DTN-P-1/2-L DTN：气动交流电力频率点（投影）焊机P：标称容量1/2：1，下臂不可调节;2, the upper arm is adjustable L: The size of arm depth, namely the size of arm length e.g.: The spot (projection) welder with a nominal capacity of 80KVA, unadjustable lower arm, and the size of arm depth of 350mm is designated as DTN-80-1-350 Features： >> With the stable mainframe >> The secondary conductive part uses the upper insulation to avoid the attachment of iron dusts or the short-circuit accident of the insulation part caused by mounting the welding parts. >> The top and bottom electrode are pressurized with electrode travel, enhancing the operability and universality while welding. >> The speed of pressure electrode can be freely adjusted to alleviate the impact on the welded item while being pressurized and also reduce the noise while welding. >> The transformer is designed in the low impedance and high-quality conductive materials are used in the secondary circuit to reduce internal friction. And get higher welding current in exchange from small input. >> Up to 15 welding procedures in storage, different welding specifications can be stored in different welding procedures, enable the accurate welding of different parts in a very convenient and smooth manner. >> The equipped secondary feedback loop can continuously make up the welding current and support two discharge operation modes. Greatly enhance the stability of welding and special materials can be used for preheating or tempering. >> UI displayed in Nixie tube or LCD is clear, plain and visible.