油位计XLV-SL

视觉

-带外铝护罩的垂直水平指示器，标准中心到中心距离300-400-500毫米;如需定制长度，请咨询我们的技术办公室。-聚酰胺pa66黑色端盖，透明聚碳酸酯管;管的后面是一个刻度对比屏幕，用于流体水平的视觉检查。-铝护罩可以旋转90度，以供侧视。镀锌M12螺栓和螺母(可根据要求提供不锈钢AISI 303)，丁纳密封70硬度计;建议最大紧固扭矩= 5 Nm(3.7英尺磅)。-适用于矿物油、液压油、柴油和含甘油的液体。避免与汽油、碳氢化合物和溶剂接触(与其他化学药剂的兼容性请与我们的技术办公室联系)。-可以通过提供2个中心到中心距离的螺纹孔M12(公差±0.5 mm)进行外部安装，也可以通过2个普通孔12,2 mm(±0.2)进行内部固定，使用法兰螺母。 - Max working temperature 80°C/176 F (with hydraulic fluid), max pressure suggested 1 bar/14,5 PSI (for use on pressure tanks contact our technical office). - REED Switch Sensor is attached to the internal transparent tube, adjustable in height according to the customer requirements of the level; minimum quote positioned at about 50 mm from the center of the lower bolt. The sensor is supplied with power cable (length 30 cm/0.98 ft) and M8 male connector; on request it is possible to provide a separate connection cable (length cm 250/8.2 ft) complete with female M8 connector. Possibility also to apply more of level sensors positioned at different heights.