Automobile gas emission analyzerGasboard-5020H

exhaust gas CO2/02 nitrogen monoxide

Introduction Gasboard—5020 emission gas analyzer can be used for measuring the concentration of automobile emission gas CO ,CO2 ,HC ,O2 and NO (optional). It is designed based on the pulsable infrared source and single source two beams non-dispersion infrared (NDIR) principle, complied with latest national standard GB 18285, as well as the international standard ISO 3930 or OIML R99 Class I, Class 0 standards, applicable to the measurement of engine exhaust gas composition fueled by gasoline, LPG, CNG diesel, etc. Features • Simultaneous measuring CO,CO2,NO,HC,O2, Lambda. • Automatic calculation and display of Lambda and A/F. • LCD screen and keypad buttons for easier setting and operation. • Selection of C3-C6 factor. • Automatic leakage test, blocking test and HC residue test of the sampling line. • Optional RPM/ Oil temp. sensors • RS-232 communication • Small size, light weight General Parameter Measurement:CO2, CO, HC, O2, NO gases, Lambda display Technology:CO2, CO, HC(NDIR), O2, NO(ECD) Measuring range: CO2:0-20%; CO:0-10%; HC:0-9999ppm; O2:0-25%; NO:0-5000ppm; Resolution:0.01%0.01%1ppm0.01%1ppm; Relative error:CO2:±4%; CO2:±3%;HC:±5%;O2:±3%;NO:±5%; Absolute error:CO2:±0.4%; CO2:±0.06%;HC:±12ppm;O2:±0.1%;NO:±25ppm; Warm-up time:10 minutes Display:LCD display Response timeTD+T90:10 second(NDIR), ECD:30 seconds Power:110V-220V±10% 50Hz±1Hz Operation temperature:0~40℃ Dimension:260mm*180mm*360mm Net weight:6kg Flow rate:0.7-1.2L/min Standard accessories:Sampling pipe, sampling probe, RS-232 cable, standby filters, PC software Options:Oil temperature option, inbuilt printer, RPM sensor options