喷嘴混合燃烧器暴徒系列

再生 燃油 直接解雇

•平滑调整火焰形成的不同的空气和油喷嘴•适合重油或轻油•石油雾化与压缩空气或天然气•低氮氧化物形成•底孔安装在发射和发射熔炉或空气套管燃烧器一般角暴徒石油燃烧器安装作为一个底孔燃烧器cross fired or end fired regenerative furnaces. The burner is able to operate with different types and quality of oil available in different areas of the world. Its design is characterized by two burner nozzles, one for oil and one for compressed air. It enables the furnace operator to adjust the flame formation in two ways: the dimension of the oil nozzle and the dimension of the air nozzle. DESCRIPTION The HORN oil burner MOB allows the furnace operator to adjust the flame shape by the dimension of the two available nozzles – one for oil and one for compressed air. Air nozzle The air nozzle cross-section has to be designed according to the available oil viscosity, the atomizing compressed air pressure and the desired flame length on site. Depending on the oil viscosity and the desired sharpness of the flame, the atomizing air consumption is between 0,2 – 0,5 Nm³/kg fuel. The available air pressure should have about 2,5 – 3,5 bar.