便携式刨边机KBM-18®

板 自航 不锈钢

平板斜角机，自推进，便携式- KBM-18®生产干净的机加工斜角，无热变形的低碳钢，不锈钢和铝板从1/4“(6.0 mm)到1 1/2“(38.1 mm)厚。更薄的材料可以做斜面。详情请咨询工厂。KBM-18®斜面板的顶部减少时间和成本。如果在材料的两侧都需要坡口的情况下，将上部坡口与KBM-18U下部坡口配合使用，可以进一步节省成本。可调起落架……可购买的KBM-18®具有可调高度，自动对准，弹簧加载的脚轮组件，可沿着任何长度的板自行坡口，保持统一的斜面和一致的根面。起落架出售单独的角度斜销…使斜面角度调整…KBM-18®units are supplied with a 30º angle bevel pin and can be supplied with bevel angle pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º bevels. Pins for other bevel angles are available upon request. KBM-18U Underside Beveling The KBM-18U is perfect for beveling the underside of the plate without need for flipping the work piece over. In combination with the KBM-18 efficiency is greatly increased when Beveling both the top and bottom of the plate. Safety is also increased as there is no need for constant maneuvering of heavy workloads. Operates at 10 feet (3 meters) per minute KBM-18® can be supplied with the following standard equipment: 1- KBM-18-X1C Mild Steel Cutter 1- set Bevel Angle Pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º 1- Tool Kit