推荐底漆C,以提高PU基粘合剂对油性皮革的粘附性。它是与单件或两部分PU粘合剂一起使用的,例如XM / 887,X / 165,X165LB,XM / 149,XM 81N,EVX169。表示引物C,用于将PU鞋底粘合到合成uppers,通过两部分发泡。特征组成:合成树脂在有机溶剂的混合物中。设定方式:溶剂释放和与加速器的反应。颜色:透明。溶剂混合物:酮和酯。组件:两部分底漆;添加2至3%的加速器VKL / 50,Desmodur®Re或RFE锅寿命:超过4小时技术数据固体含量:23-25%粘度:400-700MPa.s(Brookfield Spindle2速度。50在25°C)使用表面制备方法:皮革鞋面和皮革鞋底仔细粗糙。 Sometime, especially with very oily leathers, a double roughing may prove necessary, that is roughing with coarse grain sand paper (24) followed by a roughing with steel abrading buffer. Application of the Adhesive: apply by brush or roller spreading machine a coat of Primer C to which 3% of Accelerator should have been previously added. Drying of Primer: allow to dry at least 5 to 10 minutes before spreading the PU based adhesive. With oily leathers with very high grease content it may prove necessary to apply a slight heating to the surface by means of an infra red rays lamp or an hot air drought. Once the priming coat has dried out, then the suitable PU adhesive can be applied. Thinner: ST/121